Propellerhead Reason - 4.0 Instrukcja Operacji Pobierz pdf (Strona 182)

REDRUM

180

Redrum Parameters

Drum Sound Settings

Redrum features ten drum sound channels that can each be loaded with a Wave or

AIFF sample or a sample from a SoundFont bank. Although they are basically similar,

there are three “types” of drum sound channels, with slightly different features. This

makes some channels more suitable for certain types of drum sounds, but you are of

course free to configure your drum kits as you like.

On the following pages, all parameters will be listed. If a parameter is available for cer-

tain drum sound channels only, this will be stated.

Mute & Solo

At the top of each drum sound channel, you will find a Mute (M) and a Solo (S) button.

Muting a channel silences its output, while Soloing a channel mutes all other chan-

nels. Several channels can be muted or soloed at the same time.

You can also use keys on your MIDI keyboard to mute or solo individual drum sounds

in real time.

D The keys C2 to E3 (white keys only) will mute individual drum channels

starting with channel 1.

The sounds are muted for as long as you hold the key(s) down.

D The keys C4 to E5 (white keys only) will solo individual drum channel,

starting with channel 1.

The sounds are soloed for as long as you hold the key(s) down.

This is a great way to bring drum sounds in and out of the mix when playing Reason

live. You can also record the drum channel Mutes in the main sequencer, just like any

other controller (see page 64).

The Effect Sends (S1 & S2)

On the back panel of Redrum you will note two audio connections labeled “Send

Out” 1 and 2. When you create a Redrum device, these will by default be auto-routed

to the first two “Chaining Aux” inputs on the Mixer device (provided that these inputs

aren’t already in use).

This feature allows you to add effects to independent drum sounds in the Redrum.

D Raising the S1 knob for a drum sound channel will send the sound to the

first send effect connected to the mixer.

Similarly, the S2 knob governs the send level to the second send effect in the

mixer.

D Note that there must be send effects connected to the AUX Sends and

Returns in the mixer for this to work.

D Also note that if Redrum is soloed in the Mixer the effect sends will be

muted.

D Another way to add independent effects to drum sounds is to use the in-

dependent drum outputs.

See page 183.

Pan

Sets the Pan (stereo position) for the channel.

D If the LED above the Pan control is lit, the sound uses a stereo sample.

In that case, the Pan control serves as a stereo balance control.

Level and Velocity

The Level knob sets the volume for the channel. However, the volume can also be af-

fected by velocity (as set with the Dynamic value, or as played via MIDI). How much

the volume should be affected by velocity is set with the “Vel” knob.

D If the Vel knob is set to a positive value, the volume will become louder

with increasing velocity values.

The higher the Vel value, the larger the difference in volume between low and high

velocity values.

D A negative value inverts this relationship, so that the volume decreases

with higher velocity values.

C2 C3 C4 C5

12345678910 12345678910

Mute Solo

1 2 ... 177 178 179 180 181 182 183 184 185 186 187 ... 401 402

Komentarze do niniejszej Instrukcji

Brak uwag

Propellerhead Reason - 4.0 Instrukcja Operacji Strona 182

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Oprogramowanie Propellerhead Reason - 4.0